CRANE & HOIST DRIVE MOTORS

They distinguish by:

The characteristic of the grey cast iron housing is a forced water-cooling. Dependent on the variable position of the water connections and the mounting position, it can be necessary to use an air relief valve for the cooling system. The special design of the housing allows the cleaning of the water-cooling circuit.

Low starting current
Approximate no pull-up acceleration
Even run-up acceleration
Practical permissible number of operations
In the table the power output and speed are listed for the usual number of poles and operating modes. The drives are designed to regenerative braking. It is necessary to switch to the lowest speed before the Mechanical brake is activated, thereby the consumption of brake lining is minimized. It is possible to enlarge the traction, stroke and positioning drives with a gearbox and a fail-safe brake.

EMOD Crane and hoist drive motors Positioning drives

Traction, stroke and positioning drives are specially designed for the requests of conveying devices.

CAMIS is a leading manufacturer and distributor of engineering solutions to industry. Each of the companies is committed to providing the widest range of products and services available in the UK.

CAMIS ARE UK APPROVED DISTRIBUTERS OF